factory manufacturers commercial industrial ultrasonic bulk water meter

Quick Details

Type: ultrasonic water meter
Application: agricultural irrigation,Water Resource Management,
Usage: Tap Water, Cold Water, Water Supply and Return System
Medium: Water or other homogeneous fluids in full pipe flow
Max. Permissible working pressure:: 1.6MPa
Meter Mounting Position:: On water supply pipe
DN Size: DN15mm-DN25mm
Power consumption:: <0.2mW
Storage temperature:: -25℃~+55℃
Power supply:: Battery DC 3.6V

Product Description

It is designed for water metering settlement and production of a high performance products, with the remarkable features of low power consumption, wide measuring range ratio, stable and reliable measurement .
Each component reaches IP68 protection class, to ensure long term operation though water in the inside meter.

Size	DN15mm-DN25mm
Medium	Water or other homogeneous fluids in full pipe flow
Max. Permissible working pressure	1.6MPa
Meter Mounting Position	On water supply pipe
The sensitivity of upstream	U3
The sensitivity of downstream	D0
Climatic and mechanical	C class
Electromagnetic compatibility class	E2 class
Communication Interface	Communication Interface
Protection Class	IP68, can work 2 meters under water
Digital Display	Multi line 9 digital accumulative flow, 4 digital display for instantaneous flow, varies of state prompt and units
Data Storage	EEPROM/FLASH automatically record the accumulative flow of last 512 days
Measurement Cycle	Measuring : 1 times/second ; Verification: 4 times/second

Special Features

1. Large dynamic range is R250 and (Metrological properties) better than Class D.
2. It is designed with a protection class of IP68. The meter can keep on working under long-term
submersion in water.
3. SCH-6H ultrasonic water meter is working with micro-power consumption technology. (The lifetime of
the battery is over 10 years).
3. A flowrate as low as 1.5L/h can be precisely measured.
4. The meter has no mechanical moving parts. Because of no pressure loss, energy consumption of water
pumps and hence operating cost of water supply enterprise is drastically reduced and the service life will
be longer.
5. The meter enjoys the merits of being compacted in size and high in stability and anti-inerference
capability.
6. Thanks to the application of ultrasonic measuring technology, it is possible to mount the meter at any
angles without being affected in measuring accuracy. Moreover, the pressure loss of pipe flow can be
reduced to a minimum.
7. It supports photoelectric, RS-485 and M-BUS output interfaces and provides Radio Frequency and remote
meter data reading functions to facilitate centralized management of users. Whenever the pipe network
runs abnormally, the abnormality information can be timely reported to upper level.
8. The meter conforms to China national standard GB/T 778-2007 ( Measurement of water in full flow
in closed pipe and cold drinking water meter and hot water meter)
9. Ex-works calibration is made in conformity to China national stardard JJG162-2009(cold water meter)