high tempperature axis protection type rotary paddle level switch

High Temperature Axis Protection Type Rotary Paddle Level Switch

Basic Info

Principle: Eddy Current
Standard: Standard
Size: 86 Type
Contact Capacity: Spdt 5A/250VAC
Processing Connection: G1"Thread;Customized
Voltage Resistance: 1500VAC*1min
Protection Grade: IP65
Suitable Gravity: More Than 0.4G/Cm
Specification: IP65
Type: Infrared Sensor Switch
Wires: Spst
Application: Corridor
Certification: ISO
Temp. Rating: -20~80
Vane Rotating Speed: 1rpm
Electrical Interface: 1/2"PF
Torque: 10kg.Cm
Installation: Vertical or Horizontal Installation
Transport Package: Carton

 

Technical Parameter

Product NameHigh tempperature axis protection type rotary paddle level switch
Working VoltageAC220V/1A; DC24V/0.5A
Power3W
Contact CapacitySPDT 5A/250VAC
Processing Connection2-1/2''×5kg flange; customized
Vane Rotating Speed1RPM
Torque10kg-cm
Voltage Resistance1500VAC×1min
Suitable Gravity≥0.4g/cm3
Temp. Range-20~200ºC (the max. up to 350ºC)
Electrical Interface1/2″ PF
Protection GradeIP65
Installationvertical or horizontal installation

Introduction

Rotary Paddle Level Switch utilizes micro motor as drive device, transmission shaft contact with clutch. When it doesn't contact with material, the motor runs normally; When the blade contacts with material, the motor stops running; Detacher device outputs a contact signal and cuts the power, meanwhile it stops rotary. The pressure to blade is disappeared when the material gradually fall down and the testing device recovered to the original state by torsion spring. Torsion could be regulated according to different gravity of material. Rotary paddle level switch can eliminate the normal fault which other common rotary paddle level switch has. When adding material, it would not go to stop though the motor stops by cutting power. This can reduce fraction, operating temperature and extend the lifetime of motor. The switch contains little moving parts, three sets of drive bearing and sealed, lubricated driving gear assembly. That is why the RD series of Rotary Paddle Level Switch gains reliable control force in the market. Rotary paddle level switch specially used for detecting material level of warehouse, vessel and tank. The material level switch can prevent warehouse flooding, tank jam and warehouse empty so as to reduce flooding, material waste and standby time. Rotary Paddle Level Switch is also suitable for plastic, food, chemical industry, mineral iron, material and other solid matter.

Related Products