threaded digital turbine water flow meter sensor

Threaded digital turbine water flow meter sensor

Quick Details

Product Name: Threaded digital turbine water flow meter sensor
Nominal diameter(mm): 4~32
Accuracy: ±0.2% ±0.5%, ±1%
Transmission distance: ≤1000m
Ambient temperature: -10~55℃
Relative temperature: 5%~90%
Barometric pressure: 86~106Kpa
Power supply: +12VDC ,+24VDC(optional)
Protection grade: I P65
Meter body: 304 stainless steel

Product Description

Threaded digital turbine water flow meter sensor 1is a precise flow measurement instrument and can be used to measure the flow and volume of liquid, supporting the corresponding flow totalizer instrument .. Explosion-proof design structure, this product can display the total flow, instantaneous flow and percentage of full scale flow.With long-lasting lithium battery, single-function table Totalizer battery life up to five years, multi-function display battery life up to 12 months. Threaded turbine flowmeter can display various units, like cubic meters, gallons, liters, standard cubic meters, the standard liter etc. Threaded turbine flowmeter can set a fixed pressure and temperature parameters to compensate for the gas. As for those occasions when pressure and temperature parameters change little , threaded turbine flow meter can be used to fix the compensation totalizer. If supporting the display instrument with a special function, It can used for quantitative control, excessive alarm and other functions as an ideal flow measurement and energy meter.



Nominal diameter(mm)


Range ratio
1:10; 1:15; 1:20
Joint structure and size
Threaded joint structure
Ambient temperature
Relative temperature
Barometric pressure
Measured medium temperature
±0.5%, ±1%
Signal Line Interface
Housman joints
Signal transmission distance
Signal transmission lines
STVPV3×0.3(three wire system)
Power supply
+12VDC 、+24VDC(optional)
Output signal
Pulse frequency output
Low level≤0.8V
High level ≥8V
Meter body
304 stainless steel
Protection grade
I P65
Explosion proof
Non-explosion-proof products


Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock.
or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Could I visit your factory?
A: Of course,if you need we will help you to visit our factory.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance,balance before shippment.

, , , , , , , , , ,