pressure transmitter with diaphragm flange

Quick Details

Model Number: PT124B-3503
Item name: Remote smart differential pressure transmitter transducer
Measurement span: 0-1KPa-20MPa
Accuracy: +/-0.1%
Wetted parts material: SS316L, Hastelloy C
Output: 2-wire 4-20mA, HART communication optional
Protection grade: IP67

Product Description

The diaphragm seal of PT124B-3503 Remote smart differential pressure transmitter transducer is used to prevent medium from entering directly into the pressure-sensing assembly of the pressure transmitter. It is connected to the transmitter using capillary filled with fill fluid, such as silicon oil. The model PT124B-3503 can be used to measure liquid, gas, or stem flow, as well as liquid level, density and pressure. It outputs a 4 to 20mA DC HART signal corresponding to the measured pressure differential. The model PT124B-3503 also features remote setup and monitoring though communication with the model RST375 TERMINAL or RSM100 Modem. PT124B-3503 with span ranges (non migration) is 0 to 1KPa to 2MPa, and the rated pressure of the liquid level flange is 1.6/4MPa, 6.4MPa, 10MPa, 150psi, 300psi or 600psi.

Feature

Adopts global leading high precision silicon transducer technology, strong anti-jamming performance

Accuracy +/-0.075%

Advanced stability and static pressure performance, error less than +/-0.1%/10MPa

Internal integrated high sensitivity temperature transducer, with perfect thermal drift

Fast response time

Product Parameter

Measurement parameter	Differential pressure, liquid level
Measurement range (Non migration)	0-1KPa-2MPa
Accuracy	+/-0.1%
Wetted parts material	SS316L, Hastelloy C, tantalum
Output	2-wire 4-20mA, HART communication optional, linear output or square root output available
Ambient temperature limited	Lowest: depending on the filled liquid Highest: 85℃ -20~65℃ (with LCD display, fluorine rubber O-ring)
Process medium temperature limited	-30~400℃
Protection grade	IP67
Electrical connector	M20*1.5 cable sealing buckle, terminal suitable for 0.5-2.5mm²cable
Process connector	7/16 female at the low pressure, compatible with ANSI or DIN at high pressure. Directly install.
Mounting position effect	The body and fixed on any position. The optimum state of the flange axle should be vertical, the position deviation may cause correctable zero shift. The electronic case can rotate 360 degree; the set screw can fix it at any position. For the double flange type remote transmitter, should keep the capillary parts and flange at the same ambient condition. The minimum bend radius is 75mm, forbid twining or twisting together.